33 YEARS OF PROFESSIONAL SALES AND SERVICE

REQUEST A QUOTE
2001 Ingersoll Rand RD20 Range III Drill
2001 Ingersoll Rand RD20 Range III Drill2001 Ingersoll Rand RD20 Range III Drill2001 Ingersoll Rand RD20 Range III Drill2001 Ingersoll Rand RD20 Range III Drill2001 Ingersoll Rand RD20 Range III Drill

2001 Ingersoll Rand RD20 Range III Drill

$395,000.00

SKU: 247- Categories: ,

REQUEST PRICING

We appreciate your interest in Used Rigs, Please enter your contact information and any additional
information and a representative will contact you shortly.

Product Description

2001 Ingersoll Rand RD20 Range 3 Drill Rig- Drill rig only

Crane Carrier base truck

Cummins QSK Deck Engine

Ingersoll Rand 1250/350 air compressor

Fuller Transmission

Many rebuilds and repairs.  Machine haxs been well taken care of and is ready to drill.  See repair list below

,

May.1, 2005
 
 
Tested all coolants
  
  
March.25, 2006
 
 
Changed water pump taper lock, hydraulic pump & motor
  
July.12, 2006
 
 
Checked engine fault codes, unplugged harness from coolant sensor
  
September.24, 2006
 
 
Replaced rotation head cradle, sealed tip hatch on hydraulic tank, fabricated locks for bowl in table,
 
replaced pump stroke cable & breakout wrench pedistal, fabricated guard for hydraulic hoses in back
 
of derrick, replaced bottom travel wheels, changed hydraulic oil & filters, changed floating sub.,
 
fabricated guids in hose trough on derrick, replaced pulldown & torque gauges in console, replaced
 
passengers side main cylinder
  
November.3, 2006
 
 
Greased rig
  
November.9, 2006
 
 
Replaced air breather filter on hydraulic tank & two stage pump on gear box
  
November.10, 2006
 
 
Replaced main pump hose & hose off of main valve body that runs up derrick & three spool pump
 
hose
  
November.11, 2006
 
 
Replaced four cradle pins for travel blocks
  
December.8, 2006
 
 
Replaced hydraulic filters, compressor oil filters, one inch hydraulic check valve, fan releif valve, hi-
 
lo fan control, rubber elbow for compressor intake, rotation motors & main pumps
  
December.8, 2006
 
 
Changed three spool pump
  
December.9, 2006
 
 
Changed two stage pump
  
  
January.10, 2007
 
 
Changed oil & filters, replaced fuel filters, installed new 3/4" ball vaves on water pump, greased
 
derrick, head packing & floating sub, added two gallons of antifreeze, blew out air filters
  
January.12, 2007
 
 
Changed two stage pump
  
February.23, 2007
 
 
Replaced rotation head
  
February.25, 2007
 
 
Replaced ball check valves on water pump
  
March.2, 2007
 
 
Replaced alternator belt on deck engine
  
March.3, 2007
 
 
Replaced 1/2" winch line, 7/16" winch line, welded straps on floating sub, installed new grease
 
fittings in travel wheels & greased
March.7, 2007
 
 
Checked fire extinguishers, installed safety cables on hoses, installed hand rails on catwalks &
 
painted yellow
  
May.4, 2007
 
 
Installled one new steering tire
  
May.12, 2007
 
 
Changed oil & filters & replaced fuel filters on deck engine
  
June.6, 2007
 
 
Replaced two stage pump
  
June.23, 2007
 
5,642 hours
Changed oil & filters
  
January.15, 2008
 
 
Replaced three spool pump
  
January.20, 2008
 
56429 hours
Changed oil & filter
  
January.27, 2008
 
 
Replaced hydraulic cooler
  
March. 2008
 
 
Adjusted front axles, replaced all tires, built extension on front & repaired city horn
  
May.29, 2008
 
 
Repaired headlights & clearance lights
  
May.30, 2008
 
 
D.O.T. Inspected
  
July.15, 2008
 
 
Replaced main pump & all hydraulic filters
  
July.18, 2008
 
 
Replaced pump on aux.
  
July.21, 2008
 
 
Replaced right rear jack cylinder
  
August.11, 2008
 
2104 hours
Repaired electrical & starting system
  
August.23, 2008
 
 
Rebuilt in & out box
  
October.9, 2008
 
 
Replaced right hand drag link & steering cylinder & greased
  
November.20, 2008
 
 
Repaired elbow in hydraulic tank & handrails, replaced 1 1/4" hose to slow feed, small winch,
 
gasket on compressor elbow & console light switch
  
February.19, 2009
 
7500+ hours
Replaced deck engine, hoses, belts & coolant
  
March.10, 2009
 
12873 hours
Replaced starter on deck engine
  
March.22, 2009
 
 
Changed compressor oil & filter
  
March.24, 2009
 
5642 hours
Changed engine oil & oil in gear box
  
April.14, 2009
 
 
Replaced compressor filters only
  
May.14, 2009
 
 
Replaced oil pressure gauge, emergency kill switch, tach, engine wiring harness, suction fuel lines
 
from tank to engine & repaired & installed console cover
  
January.18, 2010
 
2706 hours
Replaced alternator, hydraulic oil & filters, compressor oil & filters, head oil & cradle blocks, old
 
style three spool with four spool valves & bent pinion at back of table, repaired bowl in table, rebuilt  
 
husco handles & bushings, repaired fitting in travel hose & bracket, replaced & repaired wiring for
 
lights, repaired rock drill pump & sealed tank
  
July.9, 2010
 
2706 hours
Cummins recalibrated engine to run smoother, adjusted fan speeds & checked over, replaced brake
 
on left side of rear axle, repaired air leak
  
October.17, 2010
 
27065 hours
Replaced motor on bean pump
  
October.19, 2010
 
2706 hours
Changed oil & filter
  
  
March.14, 2011
 
 
Replaced alternator & put new pins & blocks in cradle
  
April.17, 2011
 
 
D.O.T. inspected
  
May.4, 2011
 
 
Replaced starter
  
June.10, 2011
 
?
Replaced lower blocks where lower sheives are , adjusted cables, changed oil in rotation head,
 
replaced wear sleeve & packings, replaced one main pump, turned funk box gear around as one
 
side was worn out, tightened spring on UL88 valve
  
July.6, 2011
 
?
Replaced right main pump, changed hydraulic oil & filters, changed big canister filter by rock drill
 
tank & cleaned all housings
  
August.11, 2011
 
?
Replaced cooling fan pump & relief valve, moved carriage blocks, tightened cables & aligned head
  
August.13, 2011
 
?
Replaced gasket on top seal housing of bll shaft, welded hammer union around bottom & replaced
 
middle o-ring on left hand head motor
  
August.18, 2011
 
?
Replaced right rear hydraulic cylinder, replaced P20 pump
  
November.2, 2011
 
?
Replaced hydraulic pump drive & P20 pump
  


MANUFACTURERS WE PROUDLY REPRESENT:

UsedRigs.com | Used Drill Rigs Inventory | Drill Rig Services | The Used Drill Rig Difference | Drill Rig Manufacturers | About UsedRigs.com | Contact Venture Drilling Supply
Contact Us

Pin It on Pinterest

Share This
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!