33 YEARS OF PROFESSIONAL SALES AND SERVICE

REQUEST A QUOTE
2012  Atlas Copco RD20XC Drill Rig
2012  Atlas Copco RD20XC Drill Rig2012  Atlas Copco RD20XC Drill Rig2012  Atlas Copco RD20XC Drill Rig2012  Atlas Copco RD20XC Drill Rig2012  Atlas Copco RD20XC Drill Rig

NEW 2016 Atlas Copco RD20XC Drill Rig


REQUEST PRICING

We appreciate your interest in Used Rigs, Please enter your contact information and any additional
information and a representative will contact you shortly.

Product Description

The RD20 XC is a new configuration of the RD20 designed with
Xtra Capabilities to meet the more demanding requirements of
today’s shallow oil and gas drilling applications. The rig is designed
to handle 2 7/8 - 4 1/2 in (73 - 114 mm) Range II upset drill pipe and
4 1/2 - 8 in (114 - 203 mm) drill collars.
Pipe, collars and casing are handled by a virtually hands-free
tip-out hydraulic link and elevator system on the top drive. The
17 1/2 in (445 mm) API master bushing with available hydraulic
slip assembly reduces manual labor and enhances safety while
drilling in or tripping pipe. The same system is adaptable to oil
fi eld casing using the top drive torque limit control to assure joints
are made up to the specifi ed torque.
The RD20 XC is adaptable to rig up on the ground or on a
wide range of fl oat or substructure confi gurations. The pipe
handling system can be adapted to a pipe trailer, tubs, v-door or
automated pipe loader.
The RD20 XC also includes hydraulic make-up and break-out
wrenches that are height adjustable and simple to use. All new
circulation piping includes a 3,000 psi (207 bar) mud piping
system that readily adapts to oil fi eld compressors, boosters
and mud systems. Rig-mounted water injection and DHD
lubricator systems are piped into the air system. A new console
layout – based on driller input – simplifi es rig operation. Both
experienced and new drillers easily adapt to the console layout.

TOP DRIVE WITH ELEVATOR LINKS
A mounting assembly for the links is secured to the top-drive case. Rated for
120,000 lb (54 tonnes) — plus a safety factor — this design enables the links to tip
in/out to handle pipe, collars and casing. Cylinders are attached to the mounting
assembly and each link to tip the links out from hole center and back. The spindle
sub includes a fl oating sub and saver sub. The hydraulic elevators open/close
and lock with cylinders mounted on the elevators. A dual-caliper spindle brake is
available for directional drilling. Virtually hands-free pipe handling is easy, whether
from a trailer, tubs, v-door or automated pipe loader.

AIR / MUD PIPING
The RD20 XC mud piping has been redesigned to accommodate higher
pressures. The air manifold is set up to handle auxiliary compressors and a
booster system. The main air valve and blow-down valve are actuated from the
driller’s console. Connections for water injection and DHD lubricator are included.
The mud piping is set up for a wide range of oil fi eld mud systems. It includes a
manual gate valve, a connection and valve for a mixer line, and a heavy-duty mud
gauge. Air and mud connections are at the side of the deck for easy access.

THE RD20 XC IS AVAILABLE WITH A DIRECTIONAL-DRILLING BRAKE SYSTEM.
This enables the operator to lock the top drive spindle in any position for the full 360°
of rotation. The locking mechanism consists of a dual-caliper and disc system attached
to the spindle and mounted just below the top-drive case. The system is activated
from the console and can be feathered to fine tune a specific directional position.
The directional-drilling brake system is rated to hold up to 8,000 lbf-ft of rotational
torque. This is a very effective, rugged system that is easy to operate and maintain.

Perfect drill for setting surface casing!  Can handle Range III surface casing

 Designed with mud piping for mud drilling applications

www.atlascopco.se/Images/Brochure%20RD20%20XC%20High%20res%20%28US%29_tcm836-1663402.pdf

deepholedriller.com/category/rd20-oil-gas-drill-rig/

 

 

 

 

 

 



MANUFACTURERS WE PROUDLY REPRESENT:

UsedRigs.com | Used Drill Rigs Inventory | Drill Rig Services | The Used Drill Rig Difference | Drill Rig Manufacturers | About UsedRigs.com | Contact Venture Drilling Supply
Contact Us

Pin It on Pinterest

Share This
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!