33 YEARS OF PROFESSIONAL SALES AND SERVICE

REQUEST A QUOTE
Gardner Denver 1100M Drilling Rig 1500hp
16000′ RatingGardner Denver 1100M Drilling Rig 1500hp16000′ RatingGardner Denver 1100M Drilling Rig 1500hp

Gardner Denver 1100M Drilling Rig 1500hp, 16,000′ Rating

SKU: 112- Category:

REQUEST PRICING

We appreciate your interest in Used Rigs, Please enter your contact information and any additional
information and a representative will contact you shortly.

Product Description

Gardner-Denver 1100M Drilling Rig 1500hp

Rated for 16,000 feet
Mast-Skytop Brewster 142' x 1,000,000# SHL Capacity, 25' leg spread.  Serial #78-111.  Racking board with a full setback of 255 stands of 4 1/2" drill pipe.  Crown block 7 x 60'.  Twelve line capacity.  Mast weight is 116,095#
Sub Base- Ideco 21' High step-down box on box.  Modified to meet API 4F-RP4G Category 4 specs.  Rated to 1,000,000# and a setback capacity of 700,000#
 
Drawworks-  Gardner Denver 1100M Single Drum Drawworks.  Rated to 1500hp, with 1 3/8" Lebus grooved drum, three engine sectional compound, driven by three (3), CAT 3412 engines (each rated @ 725hp/2000RPM.  Drawworks equipped with Parkersburg V-200 Hydro-Matic auxiliary brake.  Kelco make-up and break-out Catheads
 
Block/Hook-  Ideco UTB 525 Six (6) 1-3/8" sheaves.  525 ton block/hook combination
 
Rotary Table-  Gardner Denver 27-1/2" x 53" rotary table.  Chain driven from drawworks
 
Swivel-  Continental-Emsco LB-500 swivel with spare quick-change packing
 
Pumps- Two (2) 3NB1300 (Chinese) Tri-plex pumps, 1300hp.  Both pumps have the same serial #.  Both pumps equipped with pulsation dampeners and pop-off valves.  Pump #1 is charged by a 6" x 8" centrifugal pump powered by a 40hp electric motor.  Pump #2 is charged by a 50hp electric motor.  Both pumps are belt driven by a D-399 Catepillar engine, rated @1,225hp
 
Mud Pits- Three (30 pits, 1,500 barrel capacity.  Within the pits there are sand traps, settling pit, and two 60 barrel spot/slugging tanks.  Pits also equipped with eleven (11) derrick 10hp, KF87AM215 horizontal mud agitators,  two (2) 6" x 8" centrifugal mixing pumps, both driven by 75hp electric motors.  Three (3) 6" x 8" centrifugal desander/desilter/degasser pumps, all driven by 75hp electric motors.  Pits also have covers included
 
Shaker- One (1) Derrick Dual FLC-503/High 'G' Shaker.  Two (2) 25hp motors on each shaker.  Derrick model #SGX-34-18-460/480 6-001.  1800RPM
 
Mud Cleaner- One(1) Derrick FLC-503/High 'G' (2-16) Desander/Desilter/Mud Cleaner.  25hp motors, derrick model #SGX-34-18-460/480 6-001.  1,800 RPM.  Two (2) 10" Desanding Cones (1,200 gpm).  Sixteen (16) 4" desilting cones (1,280 gpm)
 
Degasser-  One (1) Derrick VACU-FLO 1200 Degasser
 
T.P. House- One (1) 10'W x 10' H x 56' L combination office/living quarters for toolpushers
 
House- Top house with lockers and knowledge box.  BOP remote start.
 
Bottom House - Tool/change house combination. 8'W x 9'H x 38' L.  Lockers and storage shelves for rig supplies.
 
Diesel Tank- One (1) 10'W x 7'H x 34'L with two (2) 1.25" x .75" transfer pumps. Tank volume is 17,800 gallons. 212 gals./in
 
Water Tank- One (1) 7'8" W x 6'H x 30'L tank with three (3) 5" x 6" centrifugal transfer pumps, each powered by a 30hp electric motor. Tank volume is 500 barrels.
 
Gen. House- One (1) 10'W x 9'H x 50'L generator house, housing two(2) Catepillar SR4 500KW generator sets. Two (2) Curtis Model RS40 air compressors, rated @ 150cfm @ 150psi. Breaker panels and switch gear.
 
Rig Basket - One (1) 8'W x 3'H x 34' L rig basket for hauling/handling tools, rotary bushings, tongs, etc.
 
BOP Control Unit- C.P.C. Six (6) station BOP control unit with rig floor remote.  Powered by a consolidated pressure control, Model CPC BP-4032 Triplex pump, powered by an Emerson 20hp electric motor, Cat. #1C20E8, plus two(2) air driven pumps.  Unit has a 150 gallon capacity.
 
Slick line unit-  Five Star Model 092X20000 Surveyor. Unit has 20,000' of .092 slick line.
 
Hyd. Unit- One (1) Nova HPU-S40 Hydraulic power unit. Powered by a WEG model 04018XP3E32UTC 40hp electric motor.  Driving a type K3VL807A-10RKS-PO/1-L@ Hydraulic pump. Unit is used to operate kelly spinner and pipe spinner.


MANUFACTURERS WE PROUDLY REPRESENT:

UsedRigs.com | Used Drill Rigs Inventory | Drill Rig Services | The Used Drill Rig Difference | Drill Rig Manufacturers | About UsedRigs.com | Contact Venture Drilling Supply
Contact Us

Pin It on Pinterest

Share This
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!